What to do if Velleman Accessories show incorrect data?
If your Velleman Accessories device is displaying incorrect data, the first step is to replace the batteries, as low battery power can cause this issue. If changing the batteries doesn't resolve the problem, reprogram the weather station, as incorrect settings may also be the cause.
Why does my Velleman Accessories have a transmission problem?
A transmission problem with your Velleman Accessories can occur for several reasons. It could be due to an excessive distance between the units; in this case, reduce the distance. Shielding materials, such as thick walls or steel, might also be interfering, so try to find a different mounting location. Lastly, eliminate any nearby interference sources that may be disrupting the signal.
How to fix illegible data on Velleman Accessories LCD?
If the data on your Velleman Accessories LCD screen is illegible, it may be due to no data reception. Try finding a different mounting location. It could also be caused by low batteries, so replace them to see if that resolves the issue.
How to fix transmission problem on Velleman WS1060?
If you're experiencing transmission problems with your Velleman Weather Station, there are a few things you can check: 1. Reduce the distance between the units. 2. If there are shielding materials like thick walls or steel between the units, try to find a different mounting location. 3. Eliminate any interference sources that might be affecting the transmission.
What to do if data on LCD of Velleman WS1060 Weather Station is illegible?
If the data on the LCD screen of your Velleman Weather Station is illegible, it could be due to a couple of reasons. First, try replacing the batteries, as low batteries can cause this issue. Also, ensure that the unit is receiving data properly; you might need to find a different mounting location to improve data reception.
General| Category | Weather Station |
|---|---|
| Model | WS1060 |
| Rainfall Display | Yes |
| Wireless Range | Up to 100m |
| Power (Remote Sensor) | 2 x AA batteries (not included) |
| Data Logging | Yes |
| Display | LCD |
| Temperature Range (Indoor) | 0°C to 50°C |
| Humidity Range | 1% to 99% |
| Power (Base Station) | 3 x AA batteries (not included) |
| Dimensions (Base Station) | 200 x 138 x 40 mm |
To Next Page
