16 VELUX VELUX 17
Menu
Menu
Locate
Locate
P1
P1
P2
P2
A product or a Group of products can be set to travel to a
certain position.
The example shows how to set a roller blind to close by
50%.
1
Locate the product in question, see section Locating and
operating a product.
2
Product chosen is displayed. The example shows blind
No. 2.
3
Press and hold key
and watch the display. Each black
spot corresponds to the blind closing in 10% increments.
Five black spots thus correspond to it closing by 50%.
Release key
and the blind will travel to the position
chosen.
Note: A short key press will make the roller blind travel to
maximum top or bottom position.
Some decoration and sunscreening products can be
operated in two ways. For instance, a Venetian blind can
be drawn up and down and its slats can be tilted. Once the
product has been located, choose Tilt
or Turn with
the navigation keys .
To obtain ventilation via the ventilation flap without
opening the window, release key
when "Ventilation" is
displayed.
Choosing setting positions
The light in a lighting product or a Group of lighting prod-
ucts can be set to a certain luminious intensity.
The example shows how to dim the light by 50%.
1
Locate the product in question, see section Locating and
operating a product.
2
Product chosen is displayed. The example shows lighting
product No. 2.
3
Press and hold key and watch the display. Each black
spot corresponds to the light being dimmed in 10% incre-
ments. Five black spots thus correspond to it dimming by
50%.
Release key
and the light will be dimmed at the lumini-
ous intensity chosen.
Note: A short key press will switch the light on or o com-
pletely.
Choosing luminous intensity
To Next Page
Loading...
Need help?
General
