EasyManuals Logo

Velux Vario User Manual

Velux Vario
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6 VELUX
®
Important information
Read instructions carefully before installation and operation. Keep instructions for future reference and
hand them over to any new user.
Safety
Control unit KLC 410, when connected to Vario by VELUX rooflight, can be used by persons (aged
8 years and above) with sufficient experience and knowledge if they have been given instruction con-
cerning safe use and understand the hazards involved. Cleaning and user maintenance must not be made
by unsupervised children.
Children must not play with the rooflight or the control.
It is recommended to place the control in the room where the product to be operated has been installed.
Before operating, ensure that the rooflight is operated without risk of damage to property or injury to
people or animals.
If repair or adjustment work is needed, disconnect mains supply and ensure that it cannot be recon-
nected unintentionally.
For personal safety, never have your hand or body out of the rooflight without first having switched off
the mains supply to the system.
The control unit must not be covered (maximum ambient temperature: 40 °C).
The control unit must not be installed in rooms with a high level of humidity eg in rooms with swimming
pools.
Installation
Note: Do not connect the control unit to the mains supply until the installation of the chain actuator and roller blinds is completed and
they are ready for registration in wall switch KLI 311/312, control pad KLR 200 or in a potential-free switch. See page 3.
Do not connect the chain actuator to the mains supply during installation to prevent the rooflight from opening or closing suddenly and
uncontrollably.
Maintenance and installation must be carried out in consideration of Health and Safety at Work requirements.
Product
The control unit has been designed for use with chain actuators WMU 88V 2A or WMU 9093140 3A/6A in combination with Vario by
VELUX rooflight and VELUX roller blind RMM.
The control unit can control one chain actuator WMU 88V 2A or WMU 9093140 3A/6A and up to four roller blinds RMM at a time.
The control unit is compatible with products with the io-homecontrol
®
logo.
The packaging must be disposed of in accordance with national regulations.
The product, including batteries if any, is regarded as electrical and electronic equipment and contains hazardous materials, compo-
nents and substances. The crossed out wheeled bin symbolises that electrical and electronic equipment waste must not be disposed
of together with household waste. It must be collected separately at recycling stations or other collection sites or retrieved directly
from households to increase the possibilities of recycling, reuse and utilisation of electrical and electronic equipment waste. By sorting
electrical and electronic equipment waste with this symbol, you contribute to reducing the volume of incinerated or buried waste and to
reducing any negative impact on human health and the environment. Further information can be obtained from the local municipality's
technical administration or from your VELUX sales company.
If batteries can be removed, product and batteries must be disposed of separately.
In case of snow and/or ice, the operation of the rooflight may be blocked.
Maintenance and service
Disconnect mains supply before carrying out any maintenance or service work on the rooflight and/or products connected to it and
ensure that it cannot be reconnected unintentionally.
It is recommended to carry out at least one functional test annually to ensure that all moving parts of the rooflight and/or products con-
nected to it are fully functional and not influenced by wear or corrosion.
If mains cable or any other cable is damaged, it must be replaced by qualified personnel in accordance with national regulations.
It is recommended that VELUX service engineers carry out any repair work to the VELUX rooflight or VELUX electrical components.
Spare parts are available through your VELUX sales company. Please provide information from the data label.
If you have any technical questions, please contact your VELUX sales company, see telephone list or visit www.velux.com.
io-homecontrol
®
provides advanced and secure radio technology that is easy to install.
io-homecontrol
®
labelled products communicate with each other, improving comfort,
security and energy savings.
www.io-homecontrol.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Velux Vario and is the answer not in the manual?

Velux Vario Specifications

General IconGeneral
BrandVelux
ModelVario
CategoryControl Systems
LanguageEnglish

Related product manuals