VELUX
®
7
Declaration of Conformity
We herewith declare that Vario by VELUX control unit KLC 410 (BI-SC004-01)
−is in conformity with the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU,
the Radio Equipment Directive 2014/53/EU and the RoHS Directive 2011/65/EU,
−has been manufactured in accordance with the harmonised standards
EN 60335-1(2012),
EN 62233(2008),
EN 300220-2(2012),
EN 301489-1(2011),
EN 301489-3(2002),
EN 55014-1(2006)+A1(2009)+A2(2011),
EN 55014-2(1997)+A1(2001)+A2(2008) and
EN 55024(2010) and
−has been assessed in accordance with the harmonised standard EN 50581(2012).
When the above-mentioned control unit is connected to a VELUX INTEGRA
®
chain actuator
WMU 88V 2A or WMU 9093140 3A/6A or a VELUX INTEGRA
®
roller blind RMM installed in a Vario
by VELUX rooflight, the total system is to be considered as a machine, which is not to be put into ser-
vice until it has been installed according to instructions and requirements.
The total system then complies with the essential requirements of the Directives 2006/42/EC,
2014/35/EU, 2014/30/EU and 2014/53/EU of the European Parliament and Council.
VELUX A/S: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Jens Aksel Thomsen, Senior Certification Specialist)
Ådalsvej 99, DK-2970 Hørsholm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CE DoC 941986-02
03-02-2020
To Next Page
Loading...
Need help?
General
