Vemer CHRONOS Series - Page 52

&OHMJTI
- 14 -
CHRONOS Programmable Thermostat User Manual
Use the keys and to change
the temperature level and the key
to move to the next hour. Set like
this the desired level temperature
for each hour of the day.
3.2.1.1. For each hour it’ s possible to
delay the start of th regulation of
15’, 30’ or 45’
After setting the temperature
as described above, press for
a long time the key
to set
a delay.
The minutes field flashes (field
TFUXJUIUIFLFZT
and
the delay and press the key
to move to the next hour.
 8IFOUIFQSPHSBNTBUJTGJFTUIFVTFSTOFFETHPCBDLUPUIFEBZTQSFTTJOHUXJDF
the key
BOESFQFBUGPSUIFPUIFSEBZTPGUIFXFFLUIFPQFSBUJPOT
When all modifications have been performed, exit the programming menu pressing
for a long time the key
.
5FNQFSBUVSFT555NPEJGJDBUJPO
To modify the 3 temperatures of automatic operation:
1. From the normal operation display, press for
a long time the key
until the symbol
starts flashing on field 
2. Press for a short time the key
until the
symbol
flashes. Press the key to
access the parameters modification.
3s