Need help?Do you have a question about the Vemer Iride and is the answer not in the manual?
Synchronise the clock and set the time and date.
To modify the hour and the date set.
Modify the programming of the automatic operation.
To modify the 3 temperatures of automatic operation.
Allows the setting of a timing on the current operating mode.
Modify operation parameters like mode, regulation type, antifreeze temperature.
General| Type | Electronic thermostat |
|---|---|
| Mounting | Wall-mounted |
| Power source | 230V AC |
| Display | LCD |
| Temperature Range | 5°C to 35°C |
| Temperature Accuracy | ±0.5°C |
| Protection Degree | IP20 |
| Ambient Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Programming | Daily/Weekly |
| Power Supply | 230V AC |
| Output | Relay |
| Dimensions | 86 x 86 mm |
| Relative Humidity | Max 80% non-condensing |
To Next Page
