Vemer Iride - Remotely Switching Off

- 34 -
Iride Chronothermostat User Manual
3s
3s
Remotely switching off (battery powered model only)
The battery powered Iride have got an input for the connection to a clean contact to
whom to connect for example a telephone dialler to switch on or to switch off remotely
the chronothermostat with their own telephone.
The contact can have one of these two positions:
- open à normal operation (according to the set programming)
- closed à chronothermostat in off mode
Remotely off status is displayed with the flash of the symbol
on field (9) to
differentiate it from the keyboard off status (
fixed on field (9)).
Attention: remotely off status (closed contact) is more important than any
other programming , so the instrument will be in off status until the contact
doesn’t switch back to the opened position.
To reactivate the regulation, switching back to the operating (automatic or manual)
which is before the switching off, press the key
for about 3 seconds.
English