Vemer Iride - Minimum and Maximum Value; Summer Time Change

- 36 -
Iride Chronothermostat User Manual
seconds: in this way you access the configuration menu and it’s possible to
select rgb, blu, red, gre, 0ff.
MINIMUM AND MAXIMUM VALUE
It’s possible to display the measured values of minimum and maximum temperature.
To display these values press the key
(maximum value Hi) or (minimum value
L0 ).
During the display it’s possible the resetting of these values pressing the key
until 3
dashes appear in place of the temperature.
SUMMER TIME CHANGE
Summer time is the convention to step up of one hour the dials of the clocks during the
summer period in order to prolong the lighting time in the late afternoon to the loss of the
early morning.
In European countries summer time starts the last Sunday of march and ends the last
Sunday of october.
The chronothermostat manages the summer/winter time change as follows:
- increasing of one hour to move from winter time to summer time
- decreasing of one hour to move from summer time to winter time
The device is default configured to move from summer time the last Sunday of march at 2
o’clock to go back to winter time the last Sunday of October at 3 o’clock in accordance with
Europe convention.
However it’s possible to deactivate the automatic time change or to change the date or the
hour of the time change.
3s
English