- 37 -
Iride Chronothermostat User Manual
To change settings:
1. Access the menu of time and date change, pressing for a long time the key
until the
symbol
starts flashing.
2. Press the key to access the time and date
modification. At this point, during the modification
of any parameter (seconds, minutes, hour, year,
month or day) press for a long time the key
until the display shows the writing Aut0 appears
on field (3).
3. Choose with the key
and the automatic
time change activation (Aut0 0n) or its
deactivation (Aut0 0FF) and confirm with the
key
4. If 0FF we go back to the date/time change; if 0n
the current setting for the passage to summer
time is displayed (indicated with the symbol
).
In the example:
a. the Sunday (7) of the last week (LA) of march
(03) at 2 o’clock (02)
b. if it’s necessary change the parameters with
the keys
and and move to the next
parameter with the key
. The sequence
requires the insertion of:
i. day (1…7) of the week
ii. the week of the month (first, second, third,
fourth, last – LA)
iii. the month (1…12)
iv. iv. the hour
5. Press the key
the current setting for the
passage to the winter time is displayed (indicated
with the symbol
). In the example:
a. the Sunday (7) of the last week (LA) of
october (10) at 3 o’clock (03)
b. if it’s necessary change the parameters with
the keys
and and move to the next
parameter with the key
. The sequence
requires the insertion of:
i. day (1…7) of the week
ii. the week of the month (first, second, third,
fourth, last – LA)
iii. the month (1…12)
iv. the hour
3s
English
To Next Page
Loading...
