Vemer Iride - Temperatures T1, T2, T3 Modification

- 26 -
Iride Chronothermostat User Manual
Use the keys and to change
the temperature level and the key
to move to the next hour. Set like this
the desired level temperature for each
hour of the day.
3.2.1.1. For each hour it’ s possible to
delay the start of the regulation
of 15’, 30’ or 45’
After setting the temperature
as described above, press for
a long time the key
to set a
delay. The minutes field flashes
(field 3): set with the keys
and
the delay and press the
key
to move to the next hour.
4. When the program satisfies the user’s
needs, go back to the days pressing twice
the key
and repeat for the other days of
the week the operations just described.
When all modifications have been
performed, exit the programming menu
pressing for a long time the key
.
Temperatures T1, T2, T3 modification
To modify the 3 temperatures of automatic operation:
1. From the normal operation display, press for a long time the key
until the
symbol
starts flashing on field (2)
2. Press briefly the key until the symbol
flashes. Press the key to access the
parameters modification.
3s
English