Vemer Dafne - Regulation Type and Parameters

English
- 30 -
Dafne chronothermostat, user’s manual
Operating mode
This parameter allows to specify the operating mode of the chronothermostat, between
winter/ heating (
) and summer-cooling ( ).
For further information about the operating mode see the chapter “Regulation
type” on page 38.
Regulation type (for heating mode only)
For heating mode it’s possible to choose between on/off regulation (Reg 0) or
proportional (rEg P ).
For further information about regulation type see the chapter “Regulation
type” on page 38.