EasyManua.ls Logo

Vemer Dafne - Backlighting Management

Vemer Dafne
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
- 35 -
Dafne chronothermostat, user’s manual
BACKLIGHTING MANAGEMENT
The chronothermostats of Dafne series have a backlit display with led.
There are some differences between battery powered models and mains powered
models.
Battery Dafne
The battery powered model has a backlighting of blue colour, which is activated only
inside any menu of programming or if any key is pressed. In normal operating status
the backlighting is off.
This behaviour is not modifiable.
Dafne ~ 230V
The 230 V powered model has a blue backlighting which is normally on.
If the installation makes it necessary (for example in bedrooms) the
backlighting can be turned off. In this condition the chronothermostat will
continue to operate normally and the backlighting activates only when you
enter setpoint modification, advanced programming, pin insertion menu.
It’s possible to turn off the backlighting by pressing the key
for 3 seconds.
3s
3s
To reactivate the backlighting press the key for at least 3 seconds.

Related product manuals