English
- 41 -
Dafne chronothermostat, user’s manual
Timed off
If you set a timing in off status, this off status will be maintained until the end of the
timing, will then switched to the operation that preceded the deactivation (automatic
or manual).
If you set a timing, the display shows the symbol
.
Attention: the timing is calculated in minutes and for this reason if for
example you set a timing of 3 days at 12:15 on Tuesday it will expire at 12:15
on Friday.
Attention: the timings can end before their programmed expiration if one of these
actions occur:
- time/date modification (modification of the summer time change included)
- manual modification of the operating mode
- switching of digital input (for battery models only)
- change of the operating logic from winter to summer (or viceversa)
To set a timing, see chapter “Timing setting” on page 28.
To Next Page
Loading...
