English
- 10 -
User manual memo NFC
At the start the app displays the list of the associated memo devices (both Bluetooth and NFC).
To associate a new memo NFC, press the symbol “+” in the upper right corner.
In the “Choose connection type” screen, select NFC.
Place the smartphone on the display of the memo to be associated.
Note: each device is identified by the product code (for example VE339800) and by the serial number (for example 00000020).
These informations can be viewed from the main page of the memo.
Warning: make sure visible that the display shows the main page (initial). Otherwise the NFC interface is not active and the device is not
visible.
Note: from this screen you can create a virtual memo. With a virtual memo you can create programs even if you do not have a memo
available. The programming and settings of the virtual memo can be saved in the app and then transferred to the memo.
The app shows the detected memo: do a tap on the memo to complete the association. Once the procedure is complete, the memo is
added to the list of associated devices.
Select the memo on which to act from the list of associated devices.
The app displays the initial page of the selected memo. From this page you can:
a. Create new programs that will then be copied to the memo
b. View the parameters and associate an alias (name that identifies the time switch, such as “memo DW Belluno”) to the memo
To Next Page
Loading...
Need help?
General
