Vemer Memo Series User Manual

English
- 11 -
User manual memo NFC
MENU DESCRIPTION
“Hour counter” menu allows you to check the operation hours
(relay on) of the loads connected to the relays.
“Reset” menu allows you to reset settings, programmed
settings, operating hour counter.
“Ver FW” menu allows you to check the firmware version
installed on the device.
“Settings” menu allows you to change: language, date, time, daylight saving time (DST),
minimum and maximum duration of the interval between two switchings with random
program, PIN for keyboard lock.
“Programming” menu allows you to set a new program or to check,
to copy, to modify or to delete a set program.
“NFC” menu allows you to configure the NFC
communication interface.
C2
C2
C1
C2
C1
C2
C1
C2
C1
C1

Vemer Memo Series Specifications

General

Mounting	DIN Rail
Type	Digital Timer
Storage temperature	-20°C to +60°C
Protection degree	IP20
Power Supply	230V AC 50-60Hz
Programming	Weekly
Display	LCD
Output	Relay
Switching Capacity	16A
Supply voltage	230V AC
Output relay	16A
Time range	1 minute to 7 days