Need help?Do you have a question about the VEMS v3 ECU and is the answer not in the manual?
General| Lambda Input | 1 (wideband) |
|---|---|
| Enclosure | Aluminum |
| Injector Outputs | 8 |
| Ignition Outputs | 8 |
| Communication | USB |
| Memory | Flash, EEPROM |
| Operating Temperature | -40°C to +85°C |
Detailed explanation of ground connection importance and types: Power Ground and Sensor Ground.
Specific connections for Power Grounds (GND5) to the Common Ground point.
Specific connections for Sensor Ground to the Common Ground point and its purpose.
Introduction to the crank trigger sensor, its fundamental role in engine management.
Details on connecting VR and Hall effect crank sensors, including mechanical considerations.
Guide to setting up the crank trigger type, edge, and tooth configuration in VEMS software.
Wiring and connection details for the Wideband Oxygen (WB02) sensor.
Overview of connecting ignition components like coils and igniters to the VEMS unit.
Explanation of different VEMS ignition channel configurations (e.g., 8 high current, mixed).
Detailed pinout diagrams for EC18 and EC36 connectors on the VEMS ECU.
To Next Page