Why is my Vendo Vending machine not cooling?
If your Vendo Vending machine is not cooling, first, ensure that the machine is receiving power by checking the power source. Secondly, inspect the power cable connections and fuses to rule out a communication failure between the power board and the vending machine. Also, verify that the communication cable is intact.
What to do if Vendo Vending machine returns coins?
If your Vendo Vending machine returns coins, start by checking the electric plug to ensure the machine is powered. Next, verify the coin box is powered by checking the connection wiring for faults and ensuring the fuse hasn't blown. If those are fine, inspect the coin box and levers for any issues. Lastly, a dirty money channel can cause this problem, so clean the coin box thoroughly with an approved detergent.
Why does the compressor work continuously in my Vendo Vending machine?
If the compressor in your Vendo Vending machine is running continuously, check the relay board and its wiring for any faults. Also, verify that the temperature setting is correct. Finally, inspect for gas leaks and, if found, reload the cooling system after repairing the leak.
What to do if Vendo Vending machine accepts coins but does not deliver product?
If coins are accepted by your Vendo Vending machine but no product is delivered, it might be due to several reasons. First, ensure the prices are correctly set. Second, check the connection wire between the coin box and the board for communication errors. If necessary, try replacing the coin box or the board. Lastly, make sure the motor is powered by 24V when a selection is made, and always cancel any errors on the board.
Why is the compressor not working in my Vendo Vending machine?
If the compressor in your Vendo Vending machine isn't working, check the overload protection or the compressor relay.
Why is the evaporator covered in ice in my Vendo Vending machine?
If the evaporator in your Vendo Vending machine is covered in ice, start by checking the evaporator fan. Also, inspect the cooling compartment's sealing and adjust the internal door closure. Ensure that the product door is not blocked.
How to fix the display that shows the sales counter on a Vendo Vending machine?
If your Vendo Vending machine shows the sales counter, adjust the position of the 'door closed' sensor.
What to do if the condenser fan works, but the compressor is old in Vendo Vending machine?
If the condenser fan is working but the compressor is old in your Vendo Vending machine, check that the compressor windings have the right electrical resistance and that the guide relay has control wiring. The relay board may be faulty.
Why are the sales not counted in my Vendo Vending machine?
If the sales made on your Vendo Vending machine are not being counted, adjust the door square and try a sale with the door closed to ensure the door switch activates when the door is closed.
Why does my Vendo Vending machine say sold out?
If your Vendo Vending machine has sold out, it could be because all columns are empty or the full columns have signaled a product blockage. Check that the full columns work properly with the manual test, and then reset the errors.
General| Brand | Vendo |
|---|---|
| Model | VDI 100 |
| Category | Vending machines |
| Language | English |
Details the manual's scope and purpose for users, technicians, and installers.
Identifies intended readers: filling attendants, final users, and installation/maintenance technicians.
Defines the manufacturer's liability limits and compliance with directives.
Lists SandenVendo service centers in Italy and Europe for support and assistance.
Outlines the 24-month warranty for cooling system components, excluding labor and specific damages.
Provides critical safety precautions for operating, installing, and maintaining the vending machine.
Explains various symbols used in the manual and on the machine for warnings and obligations.
Presents detailed specifications including dimensions, electrical data, and cooling system parameters.
Identifies and labels the main external parts of the vending machine.
Details the interface for coin insertion and product selection.
Describes the components and connections of the machine's control box.
Illustrates and names the parts of the cooling system.
Shows and labels the components of the product dispensing mechanism.
Guides on safely moving and placing the vending machine, emphasizing vertical transport.
Specifies ideal environmental conditions and ventilation requirements for optimal operation.
Step-by-step instructions for detaching the wooden bases and fitting the machine's feet.
Explains how to ensure the machine is perfectly level for proper operation and stability.
Details the electrical connection process, including safety checks and voltage requirements.
Provides instructions for mounting and adjusting the coin mechanism on the door.
Directs users to the programming manual for setting machine controls and operations.
Explains how to set prices for individual product selections.
Instructs on applying selection labels to the machine's front panel.
Describes how to open the machine to reach internal components for maintenance.
Highlights crucial cautions regarding product compatibility and machine usage.
Defines compatible product dimensions and how to set up columns for vending.
Explains the process of loading products, including 1D and 2D column configurations.
Details the procedure for changing columns between single and double depth loading.
Instructs on using shims to adjust column spacing for various product sizes.
Guides on performing final checks, including product delivery verification.
Step-by-step instructions to power on and initialize the vending machine.
Outlines regular checks to ensure the machine operates efficiently and reliably.
Provides instructions for safely changing neon lamps within the machine.
Details general cleaning advice and precautions for maintaining the machine's appearance and function.
Lists essential safety precautions and warnings before performing any cleaning tasks.
Offers specific cleaning methods for different machine parts like painted surfaces and panels.
Specifies approved cleaning agents and materials to avoid damage.
Advises wearing protective gear during cleaning operations.
Explains the meaning of wattage indicators for the neon advertising panel.
Emphasizes the mandatory requirement for a proper grounding system for safety.
Illustrates common electrical symbols, fuse types, and operational indicators found on the machine.
Shows where to find model, serial number, and key technical specifications.
Warns users to exercise caution when operating delivery mechanisms.
Highlights critical dangers of electric shock and mechanical hazards associated with the machine.
Addresses issues where coins are returned and suggests possible causes and solutions.
Helps diagnose why products are not dispensed after payment.
Covers problems related to the compressor not working, or temperature control failures.
Provides recommendations for storing the vending machine during periods of inactivity.
Explains the importance of recycling and proper disposal of the machine and its packaging.
Details the legal obligation for separate collection and disposal of electronic waste (WEEE).
Informs about penalties related to the illegal disposal of WEEE.
To Next Page
