EasyManua.ls Logo

Vendo SVE DM6 - User Manual

Vendo SVE DM6
61 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© Date: 14/02/2017 - Revision: 6 - Code: 412447
User and maintenance manual
G-Drink Design Line SVE DL9 - SVE DL6
SVE DV9 - SVE DV6 - SVE DC6
SVE DM9 - SVE DM6
G-Drink Design Line OutDoor SVE DL9OD - SVE DL6OD
SVE DV9OD - SVE DV6OD - SVE DC6OD
SVE DM9OD - SVE DM6OD
SandenVendo Europe S.p.A.
Regione Cavallino,2
15030 Coniolo (AL) - Italy
Tel. +39 0142.335111
Fax +39 0142.562348
E-mail: marketing@sandenvendo.it
website: www.sandenvendo.com

Questions and Answers

  • J
    jeffreyfowlerAug 8, 2025
    What to do if all coins returned in Vendo Vending machines?
    • R
      Rebecca WoodardAug 8, 2025
      If all coins are returned in your Vendo Vending machine, it could be due to several reasons. First, ensure the vendor is receiving power by checking the socket. Next, verify that the coin mechanism is getting power by inspecting the connecting harness and fuse. Also, the coin mechanism might be faulty or the coin return lever isn’t closing properly, so inspect the coin mechanism or replace the lever. Lastly, a dirty coin acceptor can cause this issue; clean it with an approved detergent and dry it thoroughly.
  • W
    whiteaprilAug 21, 2025
    What to do if Vendo SVE DM6 Vending machines accept coins but no product delivered?
    • D
      Dr. Olivia RiveraAug 21, 2025
      If your Vendo Vending machine accepts coins but doesn't deliver the product, it could be due to the prices being set too high; consider resetting the prices. Another potential reason is a communication error between the coin mechanism and the board. Check the cord connecting these components, and if necessary, replace either the coin mechanism or the board.

Summary

1 General Information

1.3 Responsibility

1.7 General safety warnings

General Safety Precautions

2 Machine Features

2.2 Technical Features

Technical Specifications by Model

3 Installation

3.1 Transport and Positionning

Transport and Positioning Guidelines

3.4 Levelling

Machine Levelling Procedure

3.6 Connection to Power Mains

Electrical Power Connection

5 Using the Vending Machine

5.2 Proper Use

Recommended Product Usage

5.3 Loading Products

Product Loading Procedure

5.6 Start-up

Vending Machine Start-up Guide

6 Description and Function of Control Unit

6.1 Control Unit EASY CAREL

6.1.3 Set the temperature

Setting Internal Temperature

6.1.5 Description of the main signals and alarms

Control Unit Signals and Alarms

6.2 Control Unit CAREL ir33

6.2.3 Displaying and setting the set point

Setting CAREL ir33 Set Point

7 Maintenance

7.2 Preventive Maintenance

Preventive Maintenance Schedule

7.5 Flap Photocell Adjustment

Flap Photocell Sensitivity Adjustment

7.7 Warnings

Cleaning Operation Safety Warnings

7.9 Recommended Cleaning Products

General precautions

Cleaning Precautions and Prohibitions

9 Troubleshooting Guide

All coin returned

Coin accepted but no product delivered

Troubleshooting No Product Delivery

The cooling unit is not working.

Troubleshooting Cooling Unit Failure

The compressor is not working, the condenser fan turns, the compressor is cold

Troubleshooting Compressor Issues

Vendo SVE DM6 Specifications

General IconGeneral
TypeSnack Vending Machine
ManufacturerVendo
ModelSVE DM6
Power Supply115V, 60Hz
DisplayLED
MaterialSteel
Payment OptionsCoin mechanism, bill validator, cashless reader (optional)

Related product manuals