Instructions for the installer, maintenance
technician and final user
48
7.4 Led Tube Replacement
To replace a LED tube, work as follow:
Open the door.
Turn off the machine pressing the main switch.
Take out the LED-tube from the fastening clips.
Disconnect the LED-tube from is wiring.
Wire up the new LED-tube and fasten it with the clip.
After replacement, work as follows:
Turn on the machine pressing the main switch.
Close the door.
NOTE: with the door open, the LED’s turn off automatically!
q.ty 1 LED tube 981mm
LH side inside cell
with the vendor door open,
the leds close
AUTOMATICALLY
q.ty 2 LED tube 501mm
RH side inside cell
To Next Page
Loading...
Need help?
General
