Vendo SVE DM6 User Manual

Instructions for the installer, maintenance
technician and final user
20
© SandenVendo Europe SpA
3 INSTALLATION
3.1 Transport and Positionning
MODEL
A (mm)
B (mm)
C (mm)
NET WEIGHT
(Kg)
DL6 - DV6
DC6 - DM6
1900
960
890
295
DL9 - DV9 - DM9
1900
1235
890
345
DL6OD - DV6OD
DC6OD - DM6OD
1960
1100
1100
325
DL9OD - DV9OD
DM9OD
1960
1350
1100
375
For transport and HANDLING of the vendor follow carefully the below
instructions:
 Use a transpallet/forklift having a minimun loading capacity of 400 kg., the wooden
base (A) permits to fork the vendor on 4 sides.
 If installation is not immediate position the vendor vertically in a dry and covered area.
 CAUTION: it is absolutely forbidden to transport and/or position the vendor in a
horizontal position.
 If the machine is mistakenly placed in a horizontal position, re-position it again in
working position (vertical) and wait at least12 hours before starting it, otherwise it
would be possible to cause damages or anomalies to the cooling unit.
 Place the vendor in the installation area, work with caution, avoid jumps and bumps.
 Free the machine from its packing, extract, from the back protection grill, the power
cable and carefully place it in the final position.
FIG. 3.1
A
B
C

Vendo SVE DM6 Specifications

General

Brand	Vendo
Model	SVE DM6
Category	Vending machines
Language	English