Why is the suction power weak on my Venga VG RVC 3000 WH?
If the Venga Vacuum Cleaner's suction is weak, check for blockages at the suction entry. Empty the dustbin and clean the filters using a vacuum cleaner or cleaning brush. Ensure the filters are dry, especially if they've been exposed to water or other liquids. Allow the filters to air dry completely before using them again.
What to do if my Venga VG RVC 3000 WH can't return to the charging station?
If your Venga Vacuum Cleaner can't return to the charging station, remove any objects within 1 meter on the left and right sides and within 2 meters in front of the charging base. Placing the robot near the charging dock will allow it to return more quickly. Clean the charging contact pins.
Why does my Venga Vacuum Cleaner stop working suddenly?
If your Venga Vacuum Cleaner stops suddenly, first check if it is stuck or blocked by an obstacle. Also, verify that the battery level is not too low. If the issue continues, turn the main switch off, wait two seconds, and then turn it back on.
What to do if my Venga VG RVC 3000 WH is not charging?
If the Venga Vacuum Cleaner isn't charging, check if the charging station indicator is lit. Wipe the contact pins with a dry cloth. Listen for a beep when the robot returns to the charging point.
Why are the movements of my Venga VG RVC 3000 WH abnormal?
If your Venga Vacuum Cleaner is moving erratically, clean the sensors carefully with a dry cloth. Restart the robot by turning the power switch off and on.
How to fix a Venga Vacuum Cleaner if the rotating brush does not turn?
If the rotating brush on your Venga Vacuum Cleaner isn't turning, clean the brush and check if the brush and brush guard are installed correctly.
What does it mean if my Venga VG RVC 3000 WH flashes a red light and beeps 4 times?
If the red light is flashing and there are 4 beeps, it means the Venga Vacuum Cleaner can't return to its charging station or starting position. Make sure there are no obstacles in front of the charging station or the starting position. Wipe the charging contacts of the charging station and the robot with a clean, dry cloth.
What to do if the red light is on and my Venga Vacuum Cleaner beeps 3 times?
If the red light is steady and there are 3 beeps, the Venga Vacuum Cleaner's fan is blocked or the filter is clogged. Remove and empty the robot's bin, clean the filter, and then vigorously tap the bin to dislodge any remaining debris.
What to do if the remote for my Venga VG RVC 3000 WH Vacuum Cleaner doesn't work?
If the remote control for your Venga Vacuum Cleaner is not working, replace the batteries and make sure the robot is turned on and fully charged.
What does it mean if my Venga VG RVC 3000 WH flashes a red light and beeps 3 times?
If the red light is flashing and there are 3 beeps, the Venga Vacuum Cleaner's anti-fall sensors are dirty, it's suspended in mid-air, or stuck on a dark surface. If it's suspended or on a dark surface, move it to a new location. Otherwise, wipe the anti-fall sensors with a cloth.
Details the various accessories included with the robot and components of the charging dock.
Explains the remote control buttons and the meaning of indicator LED light signals.
Provides initial setup steps including charging dock placement and side brush installation.
Describes the Automatic, Spot, and Edge cleaning modes for various cleaning scenarios.
Details Room cleaning, Maximum suction, Mop cleaning, and returning to the charging dock.
Instructions for setting the remote's clock, scheduling cleaning, and canceling schedules.
Guides on how to empty the dust bin and clean the robot's filter.
Instructions for cleaning brushes, wheels, sensors, and extending battery life.
A guide to identifying robot errors via sounds and lights and their corresponding solutions.
Addresses common user questions regarding robot activation, remote control, and performance.
Details environmental protection directives and the ERP declaration for the product.
General| Dust container type | Bagless |
|---|---|
| Dust capacity | 0.6 L |
| Shape | Round |
| Colour | White |
| Self-docking | Yes |
| Automatic return to base station | Yes |
| HEPA filter | Yes |
| Battery voltage | 14.4 V |
| Runtime | 120 min |
| Type | Robot vacuum cleaner |
| Battery technology | Lithium Ion (Li-Ion) |
To Next Page
