Need help?Do you have a question about the Venmar EA1500 and is the answer not in the manual?
General| Category | Ventilation Hood |
|---|---|
| Brand | Venmar |
| Model | EA1500 |
| Type | Under-cabinet |
| Width | 30 inches |
| Airflow | 150 CFM |
| Noise Level | 6.5 sones |
| Lighting | Incandescent |
| Ducting | Vertical or horizontal |
| Air Flow Capacity | 150 CFM |
| Number of Motors | 1 |
| Voltage | 120V |
| Filter Type | Aluminum mesh |
| Mounting Type | Under Cabinet |
Explains the unit's functions including air recirculation, filtration, and air exchange.
Provides specific guidance for installing the unit in a basement environment.
Details the procedures and considerations for installing the unit in an attic space.
Outlines important factors for mounting the unit, including joist opening and transition requirements.
Guidance on selecting an appropriate location and mounting the unit for easy access and optimal performance.
Lists all the necessary tools and materials required for the installation process.
Step-by-step instructions on how to properly hang the unit using the provided chains and springs.
Key principles for planning efficient ductwork, emphasizing simplicity and minimal bends.
Covers the installation of ducts and registers for stale air exhaust and fresh air distribution, including location suggestions.
Detailed procedure for connecting and sealing insulated flexible ducts, ensuring an airtight seal.
Instructions for installing exterior hoods and soffit grilles for air intake and exhaust.
Comprehensive guide for wiring and mounting the control unit, including safety warnings.
Explains the control panel functions, indicators, and how to select operating modes.
Procedures for biannual maintenance, focusing on cleaning the unit's filter.
Steps for annual maintenance, including filter cleaning and exterior vent inspection.
Instructions on how to perform a master reset for maintenance indicators.
To Next Page