To Next PageTo Next Page
Need help?Do you have a question about the Venmar HF 3.0 and is the answer not in the manual?
General| Brand | Venmar |
|---|---|
| Model | HF 3.0 |
| Category | Air Cleaner |
| Language | English |
Safety instructions to reduce risk of fire, electric shock, or injury.
Cautions for installation and operation to avoid damage or issues.
Covers installation for HRV 2500, HR 2.5, HEPA 3000, HF 3.0 models.
Describes the Stand Alone installation method for different unit series.
Explains Central Draw Point installation connecting to a forced air system.
Details the Return-to-Return installation method for forced air systems.
Specific installation considerations for the HEPA 4000 model.
Details the attic installation method for the HEPA 4000 unit.
Provides dimensions for HRV 2500 and HR 2.5 units.
Provides dimensions for HEPA 3000, HF 3.0, and HEPA 4000 units.
Discusses mounting and servicing clearance requirements.
Instructions for inspecting the unit and its contents upon arrival.
Lists necessary tools, materials, and specific installation kits.
Guidelines for choosing an appropriate location for the unit.
Warnings and cautions regarding electrical shock and wiring.
Instructions for mounting the unit's oval ports using screws.
Details on how to hang the unit using chains and springs.
Guidelines for planning ductwork, including bends, joints, and length.
Details for installing non-insulated ducts in a Stand Alone system.
Details for installing non-insulated ducts in a Central Draw Point system.
Details for installing non-insulated ducts in a Return-to-Return system.
Procedure for connecting insulated flexible ducts to the unit ports.
Instructions for assembling, locating, and connecting the dual exterior hood.
Procedure for connecting the drain fittings and tubing for specific units.
Describes the 3-position main switch on the unit's front panel.
Details the C34 and CMR wall controls for different unit models.
Explains how to operate the unit using the C34 or CMR wall control.
Essential maintenance steps to perform when the filter light flashes.
Essential maintenance steps to perform when the filter light stays ON.
Procedure to reset filter indicators after replacing filters.
