2
Table of Contents
1.0 SERVICE ............................................................................................4
1.1 3-D Drawing ................................................................................4
1.2 Parts Ordering Chart....................................................................5
1.3 Technical Support ........................................................................5
2.0 SIZING ................................................................................................6
3.0 UNIT TYPE & DEFROST SETTING VS GEOGRAPHICAL LOCATION ..7
4.0 TECHNICAL DATA................................................................................8
4.1 Air Distribution (Normal Operation)..............................................8
4.2 Air Distribution (Defrost and/or Filtration Mode) ..........................8
4.3 Performance Charts ................................................................9-11
4.4 Dimensions ................................................................................12
4.5 Controls and Link Options..........................................................12
4.6 Specifications ............................................................................12
5.0 TYPICAL INSTALLATIONS ..................................................................13
5.1 Fully Ducted System ..................................................................13
5.2 Exhaust Ducted System
(Source Point Ventilation)
..................13
5.3 Simplified
(Volume Ventilation)
..................................................13
6.0 INSTALLATION....................................................................................14
6.1 Locating and Mounting the Unit ................................................14
6.2 Planning of the Ductwork ..........................................................14
6.3 Calculating the Duct Size ..........................................................15
6.3.1 Example Calculation ........................................................15
6.3.2 Example of a Design for a Fully Ducted System ............15
6.4 Installing the Ductwork and Registers ......................................16
6.4.1 Fully Ducted System........................................................16
6.4.2 Exhaust Ducted System (Source Point Ventilation) ........16
6.4.3 Simplified Installation (Volume Ventilation) ......................17
6.5 Connecting the Duct to the Unit ................................................18
6.6 Installing the Exterior Hoods ......................................................19
6.7 Connecting the Drain (Solo only) ..............................................20
7.0 CONTROL DEVICES ..........................................................................21
7.1 Main Controls ............................................................................21
7.2 Optional Controls ......................................................................21
7.3 Other Features ..........................................................................22
To Next Page
Loading...
