sion are prohibited.to prevent rain in the transport process;
Before transportation,ensure that the battery or battery pack is not
loaded,the charging device is disconnected,and there is no charge or
discharge in any form;
2.5 System power-on and power-off procedure
Discharge power on procedure
Turn the vehicle key to ON,power on BMS,wake up,battery system
self-check,no fault,then the discharge relay is closed;When the self-test fails
or there is a serious fault,the discharge relay is disconnected and the fault is
reported.
Discharge power off procedure
Turn the vehicle key to off gear,BMS power off,or discharge serious
fault,the discharge relay will be disconnected.
2.6 User charging steps and precautions
The charging step
·Ensure that the key switch of the vehicle to be charged is closed,that
is,the vehicle is not charged;
·Please use lithium charging equipment matching the model;
·Remove the head of the charging gun from the charging device,check
the charging gun and the charging socket of the battery end to ensure that
there is no foreign matter in the port and whether the terminals inside the
plug-in are damaged;
·There is a power switch at the back of the char ging device.Push on the
power switch,and the power indicator lights up.At this time,the charging gun
is not connected to the battery,and the charging device is in standby or
shutdown state.
·The manufacture’s designated charger must be used
Precautions for Charging
·Turn off the key switch to charge
·Charge in a relatively safe environment(such as avoiding liquid and
fire)
·The charging equipment should be equipped with necessary fire
extinguishing devices around it,so that emergency fire extinguishing
treatment can be carried out in extreme circumstances
To Next Page
Loading...
General