Venstar ColorTouch - Compatibility and Tools

2
Compatibility
Venstar ColorTouch® Wi-Fi Thermostat is designed to work with 24V
systems requiring both the R & C wires. This includes gas, electric, oil,
forced air, variable speed, heat pump and radiant heat. It can control:
•Heating:one,twoandthreestages(W1,W2,W3)
•Cooling:oneandtwostages(Y1,Y2)
•Heatpump:withauxiliaryandemergencyheat(Y,W1,O/B)
•Fan(G)
•Power(C,R)
•Humidifierordehumidifier(HUM,DEHUM)
•Dualfuelsystems(heatpumpwithfurnace)
•Whole-homehumidifiersanddehumidifiers
WiFi Network
& Password
Screw Driver Pencil
Leve
lP
liers
Hammer or Drill
(3/16" or 7/ 32" drill bits)
Thermostat Thermostat
Base
Drywall Anchors
and Screws
This Quick Start
Manual
W3/AUX W2 W1/O/B Y2 Y1
SENSOR
Contents
Necessary Tools