To Next PageTo Next Page
Need help?Do you have a question about the Venstar T2900 and is the answer not in the manual?
General| Model | T2900 |
|---|---|
| Display | LCD |
| Hold Function | Yes |
| Filter Change Alert | Yes |
| Power Source | 24 VAC or Battery |
| Backup Battery | Yes |
Configure the thermostat's clock and day settings for accurate operation.
Choose between Heating, Cooling, Auto, or Off modes.
Configure the thermostat for manual, auto-changeover, or programmable modes.
Understand and select between Heating, Cooling, Auto, and Off modes.
Adjusting the heat and cool setpoints for different modes.
Set up time periods and temperature setpoints for each day.
Temporarily interrupt or modify the programmed schedule.
Check thermostat settings for heat pump or reversing valve operation.
Check thermostat settings for electric heat operation.
Activate emergency heat feature on heat pump systems.
Set minimum temperature difference between heat and cool setpoints.
Limit the number of times the HVAC unit can energize per hour.
Set temperature differentials for stage transitions in multi-stage systems.
Configure minimum run-time for a stage before the next stage activates.
Utilize the Smart Recovery feature for energy savings.
Set MISC output functions using jumpers on the thermostat.
Detailed explanation of each MISC jumper setting and its function.
Restore thermostat to original factory settings.
Procedure for calibrating internal and remote sensors.
