To Next PageTo Next Page
Need help?Do you have a question about the Vent-Axia Sentinel Kinetic and is the answer not in the manual?
Describes the Vent-Axia Sentinel Kinetic & Kinetic Plus MVHR units.
Explains the function of Summer By Pass models and their operation.
Lists available Sentinel Kinetic and Kinetic Plus models.
Lists optional accessories for the Sentinel Kinetic units.
Details the Control Unit's LCD display and its functions.
Explains the functions of the four buttons on the Control Unit.
Outlines airflow, sound levels, power, and AC specifications.
Lists physical dimensions, weight, and spigot sizes.
Covers IP rating, operating and storage conditions.
Instructions for switching the unit on and off.
Describes the sequence of screens displayed upon initial power-up.
General overview of unit operation after commissioning.
Explains how to navigate and change settings in the user menu.
Details the display of airflow rates and related status messages.
Instructions for setting the unit's internal clock.
How to enable or disable the summer bypass feature.
Setting the target room temperature for bypass control.
Explains boost airflow and purge mode activation and functions.
Details the purge mode operation and countdown display.
Describes the separate cooker hood boost function.
Explains the Low Airflow mode settings and operation.
Overview of status messages and their priority.
Details the Dryout Mode operation and time remaining display.
Explains the antifrost operation and available modes.
Describes the unit's behavior when the room is too cold.
Indicates commands received from a Building Management System.
Indicates fault codes related to Constant Volume failure.
General advice on maintaining the heat recovery unit.
Instructions for cleaning or replacing fan filters.
Scheduled maintenance tasks to be performed annually.
Step-by-step guide to remove the heat exchanger for CVP models.
General guidance on troubleshooting unit issues.
Explains fault code display and reporting procedures.
Details the functions available when Control Mode 02 is selected.
Explains airflow mode selection options within Control Mode 02.
Outlines the terms and conditions for the product guarantee.
Provides contact details for Vent-Axia sales and technical support.
General| Type | Mechanical Ventilation with Heat Recovery (MVHR) |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| IP Rating | IP22 |
| Filter Type | F7 filters |
| Control | Integral digital controller |
| Mounting | Wall-mounted |
