Ventrac 3400Y - Wiring Diagram - Optional 30.0219 4-Pin Female Socket & 30.0218 4-Pin Male Plug

TROUBLESHOOTING
Troubleshooting - 65
Wiring Diagram - Optional 30.0219 4-Pin Female Socket & 30.0218 4-Pin Male Plug
Attention
This connector (4-pin socket) is designed for use with Ventrac original equipment only.
This connector (4-pin socket) is rated for 20 amp maximum current draw. Engine alternator
and/or battery capacity determine allowable continuous draw.
Terminal Position
Wire Color Function
1 Not Specied* Positive (On/Off Switched)
2 Not Specied* Negative (Constant)
3 Not Specied* Positive/Negative (Momentary Switched Reversing)
4 Not Specied* Positive/Negative (Momentary Switched Reversing)
* Refer to the part diagram in the attachment’s operator’s manual for specic wire color and terminal position for each model.
30.0219 4-pin female socket is used in the 70.3036 12 Volt Front kit & 70.3050 12 Volt Rear Kit.
30.0218 4-pin plug is used on attachments to connect to the 30.0219 socket on the power unit.
30.0219 4-Pin
Female Socket
1
1
22 33
44
Front View of Socket
Without Cover
Rear View of Socket
30.0218 4-Pin
Male Plug
1
2 3
4
4
3 2
1
Front View of Plug Rear View of Plug
Terminal Position
Wire Color Function
1 White Positive (On/Off Switched)
2 Black Negative (Constant)
3 Green or Brown Positive/Negative (Momentary Switched Reversing)
4 Red Positive/Negative (Momentary Switched Reversing)