EasyManua.ls Logo

Ventrac 3400Y - Hydraulic; Power Unit

Ventrac 3400Y
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
Troubleshooting - 71
Symptom: Possible Cause:
All TCM lights are on, even with key switch o󰀨. Low battery voltage.
Hydraulic
Symptom: Possible Cause:
Front attachment does not lift. Hydraulic oil level is low.
Excessive load on front lift.
Plugged hydraulic oil lter.
Faulty hydraulic cylinder.
Pump charge pressure is low.
Hardware missing on lift cylinder.
Hardware missing on SDLA lever links.
Steering is di󰀩cult. Hydraulic oil level is low.
Plugged hydraulic oil lter.
Faulty steering cylinder.
Pump charge pressure is low.
Excessive load on hydraulic system.
Excessive noise in hydraulic system. Hydraulic oil level is low.
Plugged hydraulic oil lter.
Wrong oil used in hydraulic system.
Cold weather - allow power unit to warm up.
Hydraulic system overheats Debris buildup around transaxle.
Damaged transaxle cooling fan.
Power Unit
Symptom: Possible Cause:
Power unit will not move with engine running. Selector lever / parking brake is in park position.
Transaxle neutral levers are disengaged for towing.
Transaxle drive belt failure.
Hydraulic oil level is low.
Brake not releasing.
Pump control connecting linkage loose or o󰀨.
Electrical (Continued)

Table of Contents