E
3
Before turning on your television set for the rst time, be sure to place it on a solid stable surface. To avoid
danger do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the
ventilation grid at the rear and be sure to leave sufcient gaps around the unit as shown.
QUICK INSTALLATION
1. Connect the TV antenna.
2. Connect the AC/DC adapter.
3. Press the / ON button to turn on the unit.
4. Press the ENTER button.
5. Press the or button to select “Air” or “CATV”,
then press the ENTER button to start auto scan.
6. The unit will immediately search all channels for
those with adequate signal strength and store
those channels with signals in memory. The unit
will take a few minutes to nish auto scan and
after this is completed, the unit will switch to the
rst channel found.
Proceed wtih auto scan?
Please select antenna type.
To Next Page
Loading...
Need help?
General
