Venturer PLV16100 User Manual

E
8
CONNECTIONS
CONNECTING A TV ANTENNA
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
NOTE
For receiving over-the-air TV broadcasts, we recommend that you use an external xed antenna. Should
you require the use of a temporary antenna, please ensure that you purchase an antenna with sufcient
ability to receive in weak signal areas. Only when you are in close proximity to a transmitter will a temporary
antenna reproduce a signal as strongly as a xed antenna.
To TV
Antenna
terminal
To Home
Antenna
terminal
Cable without a CATV
converter
Combination VHF/UHF
antenna
(ATSC / NTSC signal)
Separate VHF/UHF
antenna
(ATSC / NTSC signal)
CONNECTING TO OTHER EQUIPMENT WITH VIDEO OUTPUT
Connecting to a VCR / Camcorder
/ Video Game System / Cable /
Satellite System
Connects the AUDIO / VIDEO cable (not
included) as shown:
Make sure you connect the cable from
the other equipment (AUDIO/VIDEO
OUT) to this unit (AUDIO/VIDEO IN).
NOTE
Please refer to the user manual for the
other equipment for more information.
To connect to other equipment such as a VCR, camcorder, video game system, cable or satellite system
etc.
To AUDIO /VIDEO
IN jacks
To AUDIO / VIDEO OUT jacks

Venturer PLV16100 Specifications

General

Brand	Venturer
Model	PLV16100
Category	LCD TV
Language	English