Alarm & Settings
There are 3 groups of alarms by default. The default time 7:00 shows:
1. Setting operation:
➢Press Mode key to switch display A1 A2 A3
➢Press ”+” or ”-” to on/o the corresponding Alarm
➢Long press the Alarm key for 2 seconds to enter the corresponding Alarm setting
➢Setting sequence: Hour → Minute → Mode → Exit
➢ Mode sequence: All → weekdays → weekends
➢During the setting process, single press ”+” or ”-” to move forward or backward by 1 step.
Long press for 3 seconds to quickly set 8 steps per second
➢After the setting is completed, the corresponding Alarm will be turned on automatically
➢10 seconds without any operation, it will save the existing settings and return to the time display,
automatically turn on the corresponding Alarm
2. Alarm:
When the Alarm is triggered,
➢The alarm sound is divided into 4 sections, 1~10S Bi once, 10~20S BiBi 2 beeps, 20~30S BiBiBiBi
4 beeps, long beeps after 30 seconds.
➢The alarm symbol ashes
➢Alarm time: 2 minutes
➢When the Alarm conicts, the new Alarm will take precedence.
➢Press the ”Snooze” button, the alarm will be delayed for 5 minutes
➢Press any key to cancel Alarm.
➢In Snooze state, press any key to cancel Snooze.
Min / Max function:
In the normal time display mode, single press the ”UP” key to display the MIN and MAX values
measured on the day.
Only the maximum values appear, then the minimum values and the current values again.
Meanwhile, “MAX” or “MIN” is displayed above the values.
-In the MAX/MIN value display mode, long press the ”UP” key to clear the MAX/MIN value
-Automatically clear the MAX/MIN value at zero every day
Comfort level indicator (8)
1. Dry: Indoor humidity less than 40%
2. Comfort: when Indoor temperature is 20-28%, humidity between 40-70%
3. Wet: Indoor humidity greater than 70%
4. No display: When the temperature is not 20°C - 28°C and the humidity is 40-70%, there is no
comfort indicator
GB
To Next Page
Loading...
