Need help?Do you have a question about the Ventus W266 and is the answer not in the manual?
Procedure to verify the connection and signal strength between the transmitter and the main unit.
Mounting the transmitter securely and ensuring accurate data measurements through calibration.
Controls for backlight activation, snooze function during alarms, and continuous backlight.
Display lightning strike count, distance, and set lightning alerts.
Configure lightning detection distance alerts, strike counts, and alarm on/off.
General| Model Number | W266 |
|---|---|
| Type | Wireless Weather Station |
| Indoor Humidity Range | 20% to 95% |
| Outdoor Humidity Range | 20% to 95% |
| Power (Main Unit) | 3 x AA batteries (not included) |
| Power (Outdoor Sensor) | 2 x AA batteries (not included) |
| Display Type | LCD |
| Indoor Temperature Range | 0°C to +50°C |
| Outdoor Temperature Range | -20°C to +60°C |
| Wind Speed Range | 0 to 180 km/h |
| Rainfall Range | 0 to 9999 mm |
| Wireless Range | 328 ft (100 m) |
| Humidity Range | 20% to 95% |
| Power Source | Battery |
| Weight | Main unit: Approx. 300g, Sensor: Varies depending on sensor type |
| Temperature Range | -20°C to +60°C (outdoor), 0°C to +50°C (indoor) |
To Next Page
