IN/OUT TEMPERATURE & HUMIDITY
Temperature & humidity readings are shown on the middle of lower display.
Press [CHANNEL/SEARCH] repeatedly to select indoor, outdoor (default channel 1) or auto-channel scrolling
display modes.
To change temperature unit,
- Hold [CLOCK/SET] button to enter setting mode.
- Uses [+] or [-] to adjust and [CLOCK/SET] to confirm (or skip) the setting in below sequence:
Weather Forecast > 12/24hr format > D/M or M/D format > Time Zone Offset > Hr > Min > Yr > > Month
> Date > Temperature unit (degree C or degree F) > Rainfall unit > Wind Speed unit > Pressure unit >
Pressure value > EXIT
Note: The outdoor temperature & humidity sensor is built inside the transmitter and is assigned to channel 1.
Additional remote thermo-hygrometer sensor(s) can be purchased separately and they should be assigned to
Ch-2 or 3 only.
ICE ALERT
Ice alert indicator appears on the display next to the wind chill reading when outdoor channel-1 temperature
falls to or below 4C (or 39.2F). It provides an early alert for possible icy road condition to driver.
INDOOR & OUTDOOR HEAT INDEX
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot the heat-humidity
combination makes it feels.
Press [TEMP] button repeatedly to show the respective indoor or outdoor heat index on the display. “HEAT
INDEX” icon will appear.
INDOOR & OUTDOOR DEW POINT
Dew point is the saturation point of the air, or the temperature to which the air has to be cooled in order to get
condensation.
Press [TEMP] button repeatedly to show the respective indoor or outdoor dew point reading on the display.
“DEW POINT” icon will appear.
OUTDOOR WIND CHILL
Wind chill is the apparent temperature felt on exposed skin due to the combination of air temperature and wind
speed. The wind chill reading on the monitor is calculated based on the temperature measured from the
transmitter (channel-1) and the average wind speed.
Press [CHANNEL] button to show channel 1 outdoor temperature/ humidity display. Then press [TEMP] button
repeatedly to show the outdoor wind chill on the display. “WIND CHILL” icon will appear.
To Next Page
Loading...
