Need help?Do you have a question about the Ventus W850 and is the answer not in the manual?
Essential safety guidelines for product usage and handling.
Introduction to the 24H 10-Day Forecast Wi-Fi Weather Station.
Initial checks and optimal placement guidelines for the sensor array.
Instructions for installing and aligning the main outdoor sensor array.
Steps for attaching the rain gauge funnel to the sensor unit.
Procedures for inserting batteries into the wireless sensor array.
Setting the solar panel angle for optimal power based on location.
Steps for mounting the wireless sensor array on a pole.
Guidance on orienting the sensor array correctly for accurate measurements.
Information on connecting optional sensors to the console.
Tips for ensuring optimal signal strength and avoiding interference.
Connecting to power and installing the backup battery.
Initial configuration of the console display and Wi-Fi.
Pairing the 7-in-1 sensor array with the console.
How to reset erroneous data after sensor installation.
Explanation of the main display layout and readouts.
Identification and function of all buttons on the console.
Detailed explanation of various functions and data displayed on the console.
Meanings of the icons used for weather forecasting.
How to view the 10-day weather forecast.
Displaying daily high/low and average temperature predictions.
Accessing hourly weather predictions and average temp/rain.
Understanding and displaying atmospheric pressure readings.
Viewing 'Feels Like', Heat Index, Wind Chill, and Dew Point.
Reading indoor temperature and humidity, and optional sensors.
Setup and status of optional water leak detectors.
Understanding icons for temperature and humidity trends.
Displaying wind data including speed, gust, and direction.
Viewing current rain rate and historical rainfall data.
Information on UV index and recommended sun protection.
Reading the current sunlight intensity.
Displaying visibility and optional air quality sensor data.
Information on cloud cover and lightning detection.
Viewing historical data in graphical format.
Accessing and clearing maximum and minimum recorded values.
Viewing sunrise, sunset, moon rise, and moon set times.
Icons showing signal strength for wireless sensors.
Icons indicating the console's Wi-Fi connectivity status.
Setting console time, date, units, and hemisphere.
Configuring time-based alarms and ice alerts.
Controlling the console's backlight brightness.
Steps to register on ProWeatherLive and add the station.
Instructions for obtaining the necessary mobile application.
Entering AP mode and connecting the console to Wi-Fi via WSLink.
Configuring data upload and sensor calibration.
Instructions for updating the console's firmware.
Accessing real-time weather data via the ProWeatherLive website.
Overview of the OTA firmware update process.
Guidance on replacing batteries and re-synchronizing sensors.
Procedures for resetting the console and maintaining the sensor.
Troubleshooting guide for connectivity and data issues.
Technical details of the main display console.
Technical details of the outdoor sensor array.
General| Rainfall Display | Yes |
|---|---|
| Weather Forecast | Yes |
| Radio controlled clock (RCC) | Yes |
| Display | LCD |
| Type | Weather Station |
| Indoor Temperature Range | 0°C to +50°C |
| Wind Speed Range | 0 to 180 km/h |
| Wireless Range | 100m (open field) |
| Power Source | 2 x AA batteries |
To Next Page
