Ventus W850 - Install Rain Gauge Funnel; Install Rechargeable Batteries

7
3.1.2 INSTALL RAIN GAUGE FUNNEL
Install the rain gauge funnel and rotate clockwise to lock the funnel to the sensor array
Step 2
Step 1
Lock
grooves
3.1.3 INSTALL RECHARGEABLE BATTERIES
Step 1: Unscrew the battery door at bottom of unit and
take out the cable socket.
Step 2: Connect the Ni-MH rechargeable battery plug to
the socket.
Step 3: Make sure the red LED indicator on the back of
the sensor array is turn on and then begin ashing every
12 seconds.
Step 4: Adjust the cable and socket into shallow hole
and put the battery pack into the battery compartment.