What to do if the PASSkey is not recognized on Veolia ELGA CENTRA-RDS-US Water Filtration Systems?
If your Veolia Water Filtration System displays 'PASSkey not recognized', request registration with the Master PASSkey holder. If the problem persists, further assistance may be needed.
What to do if the UV lamp is not lit on Veolia Water Filtration Systems?
If your Veolia Water Filtration System displays 'UV lamp not lit', check that the electrical connection to the lamp is correctly orientated and engaged. Also, check that the lamp filaments are intact; replace the lamp if necessary. Do not attempt to test the lamp outside the housing. If the problem persists, further assistance may be needed.
Why will my Veolia ELGA CENTRA-RDS-US unit not operate?
If your Veolia Water Filtration System will not operate, it may be in sanitization mode and awaiting the presence of a PASSkey. Present the sanitization PASSkey if appropriate. If the problem continues, further assistance may be needed.
How to troubleshoot no display message on Veolia ELGA CENTRA-RDS-US?
If no message is displayed on your Veolia Water Filtration System, check the mains supply and lead to ensure they are properly connected. Verify that the mains power is switched on and check that the miniature circuit breaker in the electrical enclosure has not tripped. Check the illumination of the LED on the main processor board. If the LED is lit, check the display cable connections. If the problem persists, further assistance may be needed.
General| Brand | Veolia |
|---|---|
| Model | ELGA CENTRA-RDS-US |
| Category | Water Filtration Systems |
| Language | English |
Essential safety precautions related to the electrical supply, isolation, and earthing of the CENTRA unit.
Guidelines for safely isolating and releasing pressure before maintenance or work on the unit.
Explains the water flow and component functions within the CENTRA LDS, RDS, and HFV/HFR systems.
Details the feedwater, drain, dimensions, weights, connections, and product water specifications.
Guidelines for selecting a suitable environment and location for installing the CENTRA unit.
Details the hydraulic connections required for different CENTRA models.
Explains the different types of PASSkeys and their functions for system access and control.
Guidance on setting up system preferences like clock, date, and alarms via the control panel.
Procedure to enter the consumable replacement timer setup for various filters and UV lamps.
Details of potential faults, their causes, and actions for common alarms displayed by the CENTRA.
Information on setting reminders for filter, UV lamp, and sanitization replacements.
To Next Page
