VERDER Verderflex Vantage 5000 Series

Questions and Answers

M
Mathew GreenAug 4, 2025
Why VERDER Water Pump has low flow or low discharge pressure?
- D
  Donna DuncanAug 4, 2025
  Several factors can cause low flow or low discharge pressure in your VERDER Water Pump. These include: * The ratio of inner diameter to wall thickness being too large for the application. * High viscosity. * Suction lift being too high. * Tube wall thickness not matching the rotor assembly specifications. * Discharge pressure being too high. * Using non-standard tubing. * Tube blockage. * The pump needing calibration.
J
Jeffery MooreAug 9, 2025
What to do if VERDER Verderflex Vantage 5000 has low flow or low discharge pressure because of high viscosity?
- B
  Brenda TurnerAug 9, 2025
  If the viscosity of the substance is too high, causing low flow or low discharge pressure in your VERDER Water Pump, run the pump slower.
C
Catherine KimAug 16, 2025
What to do if VERDER Water Pump's tube wall thickness does not match the rotor assembly specifications, causing low flow or low discharge pressure?
- S
  Sandra GlassAug 16, 2025
  If the tube wall thickness of your VERDER Water Pump does not match the specifications of the rotor assembly, resulting in low flow or low discharge pressure, purchase an appropriate rotor assembly or change the tube wall thickness.
J
Justin CunninghamAug 22, 2025
How to fix suction lift causing low flow or low discharge pressure in VERDER Verderflex Vantage 5000?
- M
  Marissa HowardAug 22, 2025
  If a high suction lift is causing the tube in your VERDER Water Pump not to return to a fully round shape, resulting in low flow or low discharge pressure, use a thicker wall tube with the same inner diameter. Note that this will require a different rotor assembly.
B
Brett RobertsAug 27, 2025
How to fix ratio of inner diameter to wall thickness causing low flow or low discharge pressure in VERDER Water Pump?
- S
  sherrigonzalesAug 28, 2025
  To address low flow or low discharge pressure in your VERDER Water Pump due to the ratio of inner diameter to wall thickness being too large, use a thicker wall tube with the same inner diameter. Keep in mind that this will require a different rotor assembly.

Summary

1 About this Document

1.1 Target Groups

Identifies the intended audience and their responsibilities for using the pump.

1.2 Warnings and Symbols Used in the Manual

Explains warning symbols and their meanings for safe operation.

2 Safety

2.1 Intended Use

Defines the proper and intended applications for the pump.

2.2 General Safety Instructions

Provides essential safety guidelines for operating the pump.

2.3 Specific Hazards

Details specific hazards associated with the pump's operation.

3 Transport, Storage and Disposal

3.1 Transport

Covers procedures for safely transporting the pump unit.

3.2 Storage Conditions

Specifies the recommended conditions for storing the pump.

3.5 Disposal

Provides guidelines for the safe and compliant disposal of the pump.

4 Layout and Function

4.1 Design Details of Vantage 5000

Highlights the key design features of the Vantage 5000 pump.

4.2 Vantage 5000 - an overview

Provides a general overview of the Vantage 5000 pump features.

4.3 Layout

Describes the physical arrangement and components of the pump.

5 Installation and Connection

5.1 Electrical Installation

Details the necessary steps for correctly installing the pump's electrical connections.

5.2 Installing the Tube

Guides on the correct procedure for installing the pump tubing.

6 User Interface - an overview

7.1 Home Screen

Describes the primary display screen of the pump's user interface.

7.2 Main Menu

Outlines the main navigation menu for accessing pump functions.

7.3 Job Files

Explains how to manage and select job files for pump operation.

7.4 Edit Job Files

Guides users on how to create, modify, and manage pump operation job files.

7.5 Calibration

Covers the procedure for calibrating the pump for accurate dispensing.

7.6 Settings

Explains how to access and configure general pump settings.

7.7 Users; Passcodes

Describes the user access control and passcode management features.

7.8 Remote Control

Details the options for controlling the pump remotely.

7.9 Logs; History

Explains how to view and manage the pump's operational logs.

8 Operational Modes

8.1 Flow Mode

Describes the pump's operation in continuous flow mode.

8.2 Batch Mode

Explains how to operate the pump in batch dispensing mode.

8.3 Dose Mode

Details the pump's operation in dose dispensing mode.

9 Vantage 5000 Software Update Process

10 System Reset Procedure

11 Vantage 5000 Screen Calibration

12 Inspection, Maintenance and Repairs

12.1 Inspections

Outlines the recommended inspection intervals and checks for the pump.

12.2 Maintenance

Covers routine maintenance tasks for the pump.

12.3 Repairs

Details the procedures for returning the pump for repair.

12.4 Ordering Spare Parts

Provides information on how to order replacement spare parts.

13 Troubleshooting

13.1 Pump Malfunctions

Provides solutions for common pump malfunctions and issues.

14 List of Figures and Tables

14.1 List of Figures

A list of all figures included in the manual.

14.2 List of Tables

A list of all tables included in the manual.

15 Declaration of Conformity

16 Declaration of Incorporation

Appendix

1 Pump Specifications

Detailed technical specifications and ratings for the pump.

1.2 Rotor Options

Lists available rotor options and their specifications.

1.3 Tube Options

Details the available tube types and selection criteria.

VERDER Verderflex Vantage 5000 Series Specifications

General

Pump Type	Peristaltic
Series	Vantage 5000
Hose Material Compatibility	Various elastomers including natural rubber, EPDM, Hypalon
Control Options	PROFIBUS, Ethernet
Hose Replacement	Quick-release mechanism, tool-free replacement
Applications	Chemical dosing, Slurries
Construction	Stainless steel
Self-priming	Yes