VeriFone 1000SE - Connecting the VeriFone Pinpad via USB

2 | P a g e
Connecting the VeriFone Pinpad 1000SE to a computer via USB
To connect the 1000SE to a computer via USB, you will need the following cables:
The USB cable part number is: 24625-02-R Rev A
1. Plug end 1 of cable 2 into the Verifone
1000se.
2. Plug end 1 of cable 1 into cable 2.
3. Plug end 2 of cable 1 into a power
outlet.
4. Plug end 2 of cable 2 into the
computer.