VeriFone MX800 Series Ethernet Installation

4 | P a g e
Checking the Correct IP Address Settings
1. Select Start.
2. Select Run and type in cmd. This will open the
command prompt.
3. At the command prompt type in: ipconfig /all then hit Enter.
4. This will display the IP address and other information that you will need to configure the pinpad (pictured
above).
5. We will need to copy the IP Address, the Subnet Mask, the Default Gateway, and the DNS Servers.

VeriFone MX800 Series Specifications

General

Brand	VeriFone
Model	MX800 Series
Category	Touch terminals
Language	English