VeriFone MX800 Series Installation

11 | P a g e
20. During each installation the screen of the PinPad
will display the progress of the download.
21. After Step 1 through Step 3 of the Grid on page 11
have been installed the pinpad will automatically
restart.
22. After Step 4 (PCA 1.3) of the Grid on page 11 has
been installed a manual restart will be required. For
steps to manually restart the pinpad please see:
Getting Ready to Take Transactions. In order to
install Step 5 (PCA 1.4) of the Grid on page 4 we
must then get the pinpad back to the configuration
menu, please see: Entering the Configuration
Menu.
23. After Step 5 (PCA 1.4) of the Grid on page 4 have
been installed a manual restart will be required. For
steps to manually restart the pinpad please see:
Getting Ready to Take Transactions.
24. CRE/RPE will display a message stating that the
upgrade is complete and the device is waiting for a
restart. Select OK.

VeriFone MX800 Series Specifications

General

Brand	VeriFone
Model	MX800 Series
Category	Touch terminals
Language	English