Verilux HappyLight Lucent VT22 - Setup and Take Device Pretest; Setup - Remove Stand

4
Edit#: 001 Title: VT22 Bilingual Manual, 10 page
Date: 05/06/19 Version: Rev5
1
Setup – Remove Stand
• Stand affixed to back of lamp
• To remove stand – slide stand downward to
remove from keyhole
Important Safeguards — continued
Setup and Take Device Pretest
SAVE THESE INSTRUCTIONS
• Use a quality surge suppressor on all electronic equipment. Voltage variations and
spikes can damage electronic components in any system. A quality suppressor
can eliminate the vast majority of failures attributed to surges. Suppressors may be
purchased at electronics stores.
• Never cover the lamp or place anything on top of it when it is in operation.
— continued
CAUTION:
VT22_MAN_Rev5-001.indd 4 5/6/19 10:51 AM