9
Bulb Removal and Replacement — continued
Step 3: Removing Bulbs
Gently lift the fluorescent tube up and
out of the clip holder. Grasp the tube by
the white plastic base with the Verilux
®
logo on it and remove the tube from
the socket by pulling the tube towards
the black cushion pads (Fig. 4). Repeat
removal of the second bulb.
Step 4: Installing New Bulbs
Ensure the HappyLight
®
is on its
back on a large flat surface. Hold the
fluorescent tubes by the white plastic
base, not the glass. Ensure the Verilux
logo is facing up. Line up the pins on
the base of the fluorescent tube with
the holes in the socket. Gently push
the bulb into the socket until it snaps
securely in place. Repeat on other side.
Bulb Disposal: All fluorescents contain some amount of mercury. Some
states have special requirements regarding their disposal. Please go online to:
www.lamprecycle.org or call 1-866-300-5606 for more information.
Figure 4
To Next Page
Loading...
Need help?
General
