Verint Video Solutions 31
Nextiva Multiport S17XXe Series User Guide
6. To end the CLI work session:
a. Save the settings by entering s at the main menu, then pressing Enter.
b. Exit the CLI by entering q at the main menu, then pressing Enter.
Depending on the changed settings, the device may perform a soft boot.
c. Close the Verint Console window.
Warning: Do not use the Disconnect button to exit the CLI, since it does not save
your settings.
Serial Connection
You can use the SConfigurator console to easily access the CLI through a serial connection.
To access the CLI with the SConfigurator console:
1. Connect the S17XXe device to a COM port of the computer using a serial cable.
2. Start SConfigurator.
The SConfigurator window appears.
3. In the General tab, click Console.
The Verint Console window appears (see page 30).
4. In the Connect using list, select the COM port used to communicate with the device.
5. Click Connect.
The CLI main menu appears.
To Next Page
Loading...
Need help?
General