Need help?Do you have a question about the Verint Nextiva S1816e-SR and is the answer not in the manual?
General| Brand | Verint |
|---|---|
| Model | Nextiva S1816e-SR |
| Category | Media Converter |
| Language | English |
General precautions for device installation and operation, covering environmental and handling aspects.
Information on how to contact Verint for sales, pricing, and general inquiries.
Information on downloading documentation and firmware from Verint's website and extranet.
Tenth edition of the Nextiva S1800e Series User Guide.
Ninth edition of the Nextiva S1800e Series User Guide.
Eighth edition of the Nextiva S1800e Series User Guide, including new features.
Seventh edition of the Nextiva S1800e Series User Guide with noted updates.
Sixth edition of the Nextiva S1800e Series User Guide.
Fifth edition of the Nextiva S1800e Series User Guide, detailing new features.
Fourth edition of the Nextiva S1800e Series User Guide.
Third edition of the Nextiva S1800e Series User Guide.
Second edition of the Nextiva S1800e Series User Guide.
First edition of the Nextiva S1800e Series User Guide.
Details the various models of the S1800e series and their physical components.
Information on SSL certificates and IP link security for S1800e devices.
Describes video frame rates and performance for single and dual-port S1800e devices.
Lists the video resolutions supported by S1800e series multiport encoders.
Details frame rate performance for S1800e series multiport encoders.
Lists the audio formats supported by the S1800e series devices.
Explains the meaning of system and video status LEDs on S1800e devices.
Information on Real Time Streaming Protocol (RTSP) for H.264 and MPEG4 video.
Guide on configuring dry contact inputs and relay outputs on S1800e series devices.
List of items included in the installation kit for single and dual-port devices.
Procedure for installing the S1800e on a desktop or flat surface.
Steps for mounting the S1800e series device in a rack.
Instructions for connecting power to single and dual-port S1800e devices.
Specific instructions for powering the S1801e-POE model via Ethernet.
Procedure for connecting analog cameras to the device's BNC connectors.
Instructions for connecting the network cable (Ethernet) to the device.
Information on serial communication standards and connecting serial devices.
Steps for connecting RS-232 serial equipment to the S1800e.
Guide for connecting RS-422/485 devices using twisted pair cables.
Instructions for creating Data+/- signals for two-wire RS-485 serial devices.
How to connect microphones or line-in audio sources to the S1800e.
Procedure for connecting external speakers for audio output from the S1800e.
List of items included in the installation kit for multiport S1800e devices.
Procedure for installing the multiport S1800e on a desktop or flat surface.
Steps for mounting multiport S1800e devices in a rack.
Instructions for connecting power to multiport S1800e devices.
Procedure for connecting analog cameras to multiport S1800e devices.
Instructions for connecting network cables to multiport S1800e devices.
Information on serial communication for multiport S1800e devices.
How to connect audio inputs to multiport S1800e encoders.
Procedure for connecting audio output to multiport S1800e encoders.
Initial parameter setup for the SConfigurator software to discover devices.
Procedure to find and identify S1800e devices on the network using SConfigurator.
Configuring IP addresses for S1800e devices using SConfigurator, including DHCP and static settings.
Setting up serial port communication parameters for connected devices.
Detailed steps for configuring RS-232 serial ports using SConfigurator.
Steps for configuring RS-422/485 serial ports using SConfigurator.
Configuring H.264 streaming modes for S1816e-SP and S1816e-SR devices.
Configuring NTSC or PAL video standards using SConfigurator.
Defining video quality, storage, and bandwidth requirements for S1800e devices.
Setting bit rate, frame rate, and quantizer for video inputs.
Adjusting brightness, contrast, hue, and saturation for video inputs.
Configuring SNMP settings for network management.
Setting audio sampling rates and configuring audio encoder/decoder properties.
Configuring the audio sampling rate for the S1800e devices.
Configuring input type, compression, gain, and bias for audio encoders.
Configuring output gain for audio decoders.
Configuring IP addresses via the web interface, including DHCP and static settings.
Setting up serial port communication parameters through the web interface.
Configuring NTSC or PAL video standards using the web interface.
Defining video quality, storage, and bandwidth requirements via the web interface.
Configuring SNMP settings for network management through the web interface.
Setting audio sampling rates and configuring audio encoder/decoder properties via web.
Steps to activate the Nextiva Onboard Analytics license.
Setting up video overlays and rules for Nextiva Onboard Analytics.
Enabling Agent Vi video analytics and license installation.
Configuring Agent Vi video analytics and enabling markup overlays.
Customizing information displayed on the external monitor for decoders.
Configuring edge recording to microSD cards or USB drives.
Instructions for updating device firmware using SConfigurator or Web Interface.
Methods for rebooting the S1800e device using SConfigurator, Web Interface, or front panel.
Procedures to restore device settings to factory defaults via SConfigurator or front panel.
Guidance on resolving common problems like recovery mode, hardware resets, and connectivity.
Detailed technical specifications for all S1800e series devices.
Default configuration settings programmed at the factory.
To Next Page
