Need help?Do you have a question about the Verint Nextiva S1808e-A and is the answer not in the manual?
General| Compression | H.264, MJPEG |
|---|---|
| Form Factor | Standalone |
| Ports | RJ-45 10/100 Ethernet |
| Fiber Ports | SFP |
| Power Supply | 12VDC |
| Operating Temperature | 50°C |
Details the physical components and models of the S1800e series devices.
Explains SSL certificate for securing IP links and data transmission.
Details supported video frame rates and resolutions for single/dual port models.
Details video resolutions supported by S1800e series multi-port encoders.
Lists performance metrics for H.264 compression on S1800e multi-port encoders.
Describes supported audio codecs, sampling frequency, bits, and bitrate.
Explains the meaning of different LED patterns and their states.
Explains Real Time Streaming Protocol (RTSP) for H.264/MPEG4 video streaming.
Describes how to use dry contact inputs and relay outputs for triggers and alarms.
Lists the items included in the installation kit for single/dual-port devices.
Lists optional accessories available for purchase with the encoder/decoder.
Provides steps for mounting the device on a desktop or flat surface.
Details the procedure for installing the device in a rackmount unit.
Explains how to connect the power supply to single/dual-port devices.
Details the specific steps for powering the S1801e-POE model via Ethernet.
Describes how to connect analog cameras directly to the device via BNC connectors.
Explains how to connect the network cable to the device's LAN port.
Explains serial communication standards and terminal blocks.
Guides on connecting RS-232 serial equipment, including DTE/DCE considerations.
Details how to connect devices using RS-422/485 protocols with twisted pair cables.
Explains creating Data+/- signals for two-wire RS-485 serial devices.
Describes how to connect audio sources like microphones or line-in audio.
Explains how to connect external speakers for audio output.
Lists items included in the installation kit for multiport devices.
Lists optional accessories for multiport devices, including power supplies.
Provides steps for mounting multiport devices on a desktop or flat surface.
Details the procedure for installing multiport devices in a rackmount unit.
Explains how to connect certified power supplies to multiport devices.
Describes connecting analog cameras to multiport devices via BNC connectors.
Explains connecting network cables to LAN ports on multiport devices.
Explains serial communication standards and terminal blocks for multiport devices.
Guides on connecting RS-232 serial equipment to multiport devices.
Details connecting devices using RS-422/485 protocols with twisted pair cables.
Explains creating Data+/- signals for two-wire RS-485 serial devices.
Describes connecting audio devices to multiport encoders via RCA connectors.
Explains connecting external speakers to multiport encoders for audio output.
Details initial parameter setup for the SConfigurator tool.
Explains how to use SConfigurator to find devices on the network.
Covers default DHCP, APIPA, and manual IP address configuration for devices.
Steps to configure devices to obtain IP addresses automatically via DHCP.
Guides on manually assigning a static IP address to devices.
Ensures communication between serial equipment and the device.
Steps to configure RS-232 serial ports using the SConfigurator tool.
Steps to configure RS-422/485 serial ports using the SConfigurator tool.
How to configure dual or triple stream modes for specific multiport encoders.
Explains NTSC and PAL video standards and how to configure them.
Defines video profile settings like frame rate, resolution, and bit rate for image quality.
Details setting bit rate, frame rate, quantizer, and resolution for video inputs.
Adjusting brightness, contrast, hue, and saturation for video inputs.
Configuring SNMP for network management systems to monitor device data.
Supports bi-directional audio input/output and lists supported audio formats.
Explains sampling rate conversion from analog to digital for audio signals.
Configuring audio input type, compression, gain, and bias for encoders.
Setting the gain for audio output to adjust the input signal amplitude.
Covers default DHCP, APIPA, and manual IP address configuration via web interface.
Steps to configure devices to obtain IP addresses automatically via DHCP.
Guides on manually assigning a static IP address to devices.
Ensures communication between serial equipment and the device via web interface.
Steps to configure RS-232 serial ports using the web interface.
Steps to configure RS-422/485 serial ports using the web interface.
Explains NTSC and PAL video standards and how to configure them via web interface.
Defines video profile settings like frame rate, resolution, and bit rate for image quality.
Details setting bit rate, frame rate, quantizer, and resolution for encoder inputs.
Adjusting brightness, contrast, hue, and saturation for video inputs.
Configuration for real-time feature detecting camera repositioning or focus loss.
Setting up motion detection for each video input.
Setting deinterlacing modes for decoder outputs.
Configuring resolution, discovery mode, receiver mode, and dwell time for video outputs.
Configuring SNMP for network management systems to monitor device data.
Downloading and viewing device Management Information Base (MIB) for SNMP applications.
Supports bi-directional audio input/output and lists supported audio formats.
Explains sampling rate conversion from analog to digital for audio signals.
Configuring audio input type, bias, and gain for capturing audio signals.
Configuring audio compression mode for encoders.
Setting the gain for audio output to adjust the input signal amplitude.
Configuring compression mode for audio decoders.
Steps to activate the Nextiva Onboard Analytics license.
Steps to configure overlay display and analytics rules in the web interface.
Information on activating Agent Vi Video Analytics as an alternative to Nextiva.
Steps to configure Agent Vi Video Analytics, including port numbers and overlays.
Configuring information displayed on external monitors for decoders.
Details on enabling edge storage via microSD or USB drives.
Instructions for installing new firmware to access new features and updates.
Steps to upgrade firmware using the SConfigurator software.
Steps to upgrade firmware through the device's web interface.
Procedures to reboot the device to re-initialize settings.
Steps to reboot the device using the SConfigurator software.
Steps to reboot the device via the web interface's Quick Launch bar.
Steps to reboot the device using the physical reset button on the front panel.
Restores factory default configuration, deleting user-defined values.
Steps to restore factory defaults via the SConfigurator tool.
Steps to restore factory defaults via the web interface.
Steps to restore factory defaults using the physical reset button.
Provides basic troubleshooting procedures and contact information for support.
Procedures for accessing the device in recovery mode for firmware updates.
Identifies and resolves issues related to lost camera connections.
Steps to resolve issues where SConfigurator cannot discover the device.
Diagnoses and resolves issues related to poor video quality.
Presents technical specifications for the S1800e series devices in a table.
Details the default serial port and access management configurations.
To Next Page
