Chapter 5: Using the Web Interface for
Configuration
Once you have connected all the equipment to the device, you can begin configuring the device to ensure
that it can communicate with the attached devices and with a video management software over the network.
In order to configure the device, you first need to obtain the IP address using SConfigurator.
The S1800e series devices have a self-contained web server allowing you to connect directly to it using a
web browser. The Web Interface is a browser-based tool that allows you to configure the S1800e series
devices. For complete information on the Web Interface, refer to the Web Interface User Guide.
NOTE: The default username and password for the Web Interface is admin. We recommend that you
change the default password for the Edge device to a more secure password.
The following topics are discussed:
IP Address Configuration 73
Configuring the Serial Ports 77
Setting the Video Standard 79
Video Profile 82
Setting the SNMP Properties 90
Audio Properties 92
Activating Nextiva Onboard Analytics 96
Configuring Nextiva Onboard Analytics 97
Activating Agent Vi Video Analytics 98
Configuring Agent Vi Video Analytics 100
Setting the On-Screen Display for the Decoders 101
Recording to the Storage Device 102
Chapter
5
To Next Page
Loading...
Need help?
General
