S1808e,
S1808e-A, S1816e,
S1816e-A, S1816e-SP and
S1816e-SR
S1801e
S1802e
S1801e-R S1801e-R-HD
compliant power supply
PSP1282-10: Efficiency
level V compliant 19-inch
rack mountable power
supply for up to 10 devices
PSP1282-20: Efficiency
level V 19-inch rack
mountable power supply for
up to 20 devices
PDP10-2: 19-inch 1U
power distribution rack
mount panel to connect up
to 10 devices
PS1281: 19-inch rack
mountable power supply for
up to 10 multiport devices.
Warranty
3-year limited warranty covering parts and labor (for the Americas). Contact your Verint
representative for warranty details for your regions.
Factory Default Configuration
The S1800e series encoders are programmed at the factory with the following configuration:
Type Configuration
Serial port Bit rate: 4800 bps
Data bits: 8
Parity: none
Stop bit: 1
RS-232
RS-422/485 operating mode: RS-422 4-wire
Access
management
IP firmware update: Enabled
Global security profile: Disabled
Factory Default Configuration
117
www.verint.com/video_solutions
To Next Page
Loading...
Need help?
General
