Verint Nextiva S1808e-A User Manual

► Perform the following steps:
1. Start SConfigurator.
2. Select the Units tab, then click Discover.
3. Select the Nextiva device, and click Configure.
4. In the tree view, click Unit >Audio.
5. From the Sampling Rate list, select 8 kHz.
6. Click OK.
Setting the Audio Encoder Properties
The S1801e, S1802e, S1808e-A and S1816e-A supports bi-directional audio: audio input and
output. Audio input allows you to capture audio signals from a camera, provided that it supports
audio, at the same time it captures video.
► Perform the following steps:
1. Start SConfigurator.
2. Select the Units tab, then click Discover.
3. Select the Nextiva device, and click Configure.
4. In the tree view, click Unit >Audio >Encoder.
5. Select an Encoder to configure.
Audio Properties
69
www.verint.com/video_solutions

Verint Nextiva S1808e-A Specifications

General

Brand	Verint
Model	Nextiva S1808e-A
Category	Media Converter
Language	English